Hinged disc stubble plough is an agricultural implement for traditional and basic and minimum tillage without first plowing (instead of plowing) for cereals, industrial and forage crops, as well as to rejuvenate grassed meadows and stubble breaking. There are disc stubble ploughs and share scufflers.
Disc stubble plough is a powerful machine necessary for preplant treatment of large area under fodder crops and industrial crops. Also used for stubble breaking and rejuvenation grassed meadows.
Disc stubble plough can significantly reduce the number of operations required to tillage the soil, due to the fact that its construction involves their combination. Leveling topsoil performing, its crumbling and grinding plant remains, including the dense thickets of weeds.
And we are pleased to introduce our own design with advanced construction: Disc stubble plough. Our engineers were able to achieve a number of advantages:
- The ability to work in all weather conditions and different levels of soil moisture;
- Fuel economy by reducing the draft resistance;
- Self-cleaning disc;
- The protection of discs and bearing assemblies when running over obstacles;
- Uniform depth of tillage.
During production process of disc stubble plough DSP were used only high quality materials, as well as Italian and German components. So you can be sure that the unit will serve you for years to come.
The implement allows to reduce the number of tillage in 3-5 times by combining them in a single operation. It improves the quality of tillage (crumbling, leveling the surface, grinding plant remains). The big advantage, compared to similar products is much less dependent on weather conditions and low energy consumption. The disc on the unit serves as a ploughshare and the blade that promotes better circulation cut layer, its breakage, and reduce the required draft force of the tractor through the use of a spring rack. The absence of disc batteries with a single axis in construction provides an ability to work in wet weather on the lands with a lot of plant residues, as well as on the land with any number of weeds, while avoiding the winding axle drive and plugging dense rows of discs. Eliminates the necessity of scrapers in construction as occurs during operation self-cleaning disc. Setting processing depth is carried out by means of staking fingers on parallelogram packer roller to a depth of 15 cm. The main feature in construction is the ability to operate at higher speeds, that achieves optimum mixing and grinding plant residues and the perfect preparation of the soil.
Disc stubble plough consists of a frame with bearing wheels and separate sections having 8-10 spherical discs. In processing, the discs are rotating, loosen the soil and partly wrapped layer. The panel reinforced ballast box for increasing the load on the discs and depth of processing. For better adaptation to field relief sections are attached to the beam plows hinged articulately. Sections are placed at an angle (angle of attack) to the line of motion of the machine. Stubble ploughs are produced with a constant angle of attack. After the work process of disc stubble plough correctly adjusted it on the field get fine lumpy top layer with the height of the ridges is not more than 5 cm, with a fully clipped weeds.
